Diurnal and seasonal variations in long-term changes in the E-layer critical frequency

Long-term changes in the E-layer critical frequency, foE, at three stations of the European region (Juliusruh, Slough and Rome) and also at Moscow and Wakkanai stations are analyzed by the method developed by the authors and described in detail in the previous papers. It is found that Juliusruh and Slough stations demonstrate a well-pronounced change in foE (a trend) during two previous decades. At the same time, the same features of the behavior of the aforementioned trend k(foE) are obtained. The trend is positive and negative in the morning and evening hours, respectively. Similar diurnal behavior of k(foE) is found also for Moscow station but with lower absolute values of the trends. A well-pronounced seasonal behavior of k(foE) is detected at Juliusruh and Slough: the trend is minimal and maximal in the summer period and at the end of fall—beginning of winter, respectively. The maximal amplitude in the morning hours reaches +0.04?MHz per year, whereas the minimal amplitude in evening hours is ?0.06?MHz per year. No systematic changes exceeding by the magnitude 0.01?MHz per year are found for Rome and Wakkanai stations. It is assumed that the observed trends are related to changes (trends) in the meridional wind bringing NO molecules from the auroral oval to lower latitudes.     

翼身融合运输机分布式电推进系统设计及油耗评估

针对翼身融合运输机开展了分布式电推进系统的总体设计与油耗评估。通过数值计算完成了70t载质量翼身融合飞机的气动设计与优化。在巡航马赫数为0.80和10km高度的设计点,最大升阻比达到了24。通过求解积分边界层方程组,完成了电推进系统的总体设计。电推进系统包含10个推进风扇,风扇直径为1.45m，压比为1.35，巡航功率为2.94MW。建立了考虑燃烧过程的发动机一维性能模型,对发动机油耗进行了评估,获得了不同发动机循环参数下燃油消耗。建模结果表明,基于翼身融合布局和分布式电推进技术,可使运输机的油耗较C-17节省近50%。      

一种基于虚拟页地址映射的NAND Flash管理算法

本文提出了一种基于虚拟页地址映射的NAND Flash管理算法.该算法通过定义坏块表、对应表等结构，以及设计的坏块替换策略和虚拟页地址到实际物理页地址的转换算法，实现上层软件采用虚拟地址对NAND Flash的无坏块连续页地址访问.该算法是一种高效的地址映射算法，能高效地对数据进行索引，占用SRAM空间较少，使系统达到高性能，并使得闪存使用的更加稳定持久.     

展向离散抽吸法控制边界层转捩实验研究

通过实验成功发展了一种生成大振幅稳定条带的有效方法,即展向离散抽吸方法。在此基础上,开展条带控制边界层转捩的研究。实验在水洞中进行,以零压力梯度平板边界层为研究对象,利用氢气泡时间线法观测引入条带前后人工激发转捩边界层中扰动发展变化,分析条带对转捩的控制效果及参数影响。结果表明,展向离散抽吸方法生成的稳定条带最大振幅可达28.4%U（U为自由流速度）;实验中引入的宽度14和28mm的稳定条带都能起到抑制转捩的作用;条带振幅越大、宽度越窄,抑制效果越明显。研究结果为探索降低水/空气中航行器摩阻的新技术提供有价值的参考。     

Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

关于设计保证系统适航独立核查的思考

民用飞机主制造商建立设计保证系统，旨在民机研制过程中充分发挥自主适航的能力，通过组织机构、职责、程序和资源落实设计、适航以及独立监督三大职能，以保证航空产品的设计或者设计更改满足适航当局的要求。其中，设计保证系统适航职能的适航独立核查功能正是这一保证的关键。基于对设计保证系统适航独立核查功能的具体分析基础上，从设计保证系统的规划与设计层面提出了实现适航独立核查功能的机制，给出了机制中需明确的责任主体、职责与资质要求、工作流程与支撑工具以及管理程序等方面的建议，并从大数据知识的技术支撑和阶梯式递进的人才培训保障两方面以不断优化改进的方法工具与人力配置来深化适航独立核查的功能与效果，进而增强设计保证系统对飞机型号研制的保证作用。     

涡轴发动机发展与技术趋势

首先,对美国20世纪70年代以来各时期涡轴发动机发展规划及其性能演变过程进行了梳理,并分析了不同循环类型及循环参数的选择,进行了性能统计分析。然后,介绍了直升机/发动机一体化设计理论的基础与方法。最后本文提出新一代超低排放涡轴发动机的概念,指出降低总耗油量的同时提高功重比,才能实现超低排放。     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

基于工厂模式的OSLC数据集成接口设计与实现

复杂软件系统往往由不同地域的研发团队采用不同的开发工具来协同完成，研发过程中存在数据难以集成的问题.基于开放式生命周期协作服务(OSLC)规范来设计软件协同开发数据接口，有利于提高软件协同开发的效率.首次结合工厂模式和OSLC规范设计并实现数据集成接口，将不同工具的数据集成抽象成统一的公共接口，从而采用统一的数据接口和规范实现不同工具的数据集成，有利于优化软件系统体系结构.以符合OSLC规范的Bugzilla缺陷管理系统和Jenkins持续集成工具的集成为例，以面向航天软件系统研发的SunwiseAEM一体化研发管理平台为载体，基于工厂模式设计并实现了符合OSLC规范的数据集成系统，实现了不同工具间的数据集成，提供了一种通用的、可扩展的数据集成方式.     

不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题，首先采用大涡模拟数值方法进行了数值仿真，其次用光线追迹方法进行了气动光学效应仿真，最后对混合层的气动光学效应进行了评价。结果表明，混合层流场涡结构与光程差极小值存在一一对应关系，并且其流速比低的混合层气动光学效应更加严重。同时，研究了不同光学参数对斯特列尔比的影响，得到了相应的规律。